ENTERPRISES, INC.
HOME
ENVIRO - BOND ™
ENVIRO - BOND ™ FAQ.
VIDEO.
BILGE SOCKS.
SAFETY SEAL.
CONTAINMENT BOOM.
DRAIN PROTECTOR ®
PRODUCTS.
DOCUMENTS.
ORDER .
E-MAIL .
BUZZARDS BAY
REPORT ON
BILGE SOCKSMASSACHUSETTS
COASTAL ZONE
MANAGEMENT
BILGE SOCK LETTERCHEMICAL
COMPATIBILITY
TEST
LAKEFRONT ENTERPRISES, INC.
Used for...
- PLUMBING REPAIRS
- Sink traps, oil & water tanks, pipe joints, drains leaks, etc...
- ELECTRICAL
- Can replace tape, ceramic connectors, knobs and insulating materials
- CERAMIC REPAIR
- Porcelain wall tiles, floor tiles, sinks, toilets, etc...
- AUTO REPAIR
- Metal strips, small dents and cracked parts
- CUSTOM FORMED GASKETS
- For permanent sealing and bonding
- HOME REPAIR
- Picture hanging, light fixture installation, loose rug, furniture legs, air duct leaks, etc...
Can be...
- Drilled, filled, tapped, sanded and machined after one hour of curing
- Painted immediately, even before full hardening
- Used under water
| Physical Properties @ 22° C | ||
|---|---|---|
| Color | Black and Gray | |
| Shore "D" Hardness ASTM D2240 | 84 | |
| Viscosity Resin | Dough | |
| Viscosity Hardener | Dough | |
| Density Resin | 13.96 WPG | |
| Density Hardener | 12.57 WPG | |
| Specific Gravity, Resin | 1.68 | |
| Specific Gravity, Hardener | 1.51 | |
| IZOD Impact | .3 ft lbs/in | |
| Shear Strength | 700 PSI | |
| Tensile Strength | 7,000 PSI | |
| Compressive Strength | 19,000 PSI | |
| Application Temp. | 50°F to 140°F | |
| Service Temp. | -40°F to 300°F | |
| Shelf Life | 2 Years | |
| Mixing & Cure Instructions | ||
|---|---|---|
| Ratio Part by Weight | Parts Resin | 100 |
| Parts Hardener | 100 | |
| Ratio Part by Volume | Parts Resin | 1 |
| Parts Hardener | 1 | |
| Pot Life 100 Gram Mass, Room Temp. | (72°F) | 5 - 10 mins. |
Note: Not recommended for use on polyethylene and polypropylene.
LAKEFRONT ENTERPRISES, INC.
P.O. Box 573, North Hampton, NH 03862
Tel: (603) 964-2740 Fax: (603) 964-2739
E-Mail: berquist@enviro-bond.com
Web: www.enviro-bond.com